Fencing and Gate Manufacturers Sydney  
POWDER COATING
 
Powder Coating is the solution for coating a diverse range of substrates. Electrostatically applied and oven cured, the process produces a finish with minimal impact on the environment. The cleanliness of the substrate and adequacy of the chemical pre-treatment are big factors determining the long term adhesion of the coating and it’s resistance to the forces of weathering.

Boresi is a foundation member of the Interpon Partner Plus One program and has been awarded the Plus One category. This is the highest category available within the Interpon Partner Plus One program. With this accreditation comes a highly regarded Interpon Partner Plus One 7 years colour warranty. Only very few companies nationally are able to offer this type of warranty as strict regulations and requirements are placed upon it. (Colour warranty applies only to Boresi manufactured products).

Recently Boresi installed a Complete In Line Pre-Treatment and Powder Coating Plant. With this large new state of the art Automatic Inline Powder Coating Plant we ensure a consistent film built with penetration to all areas, Boresi is providing a service to Carports and Awning companies all over Australia. Boresi has the ability to Powder Coat products up to 10.4 metres long.

Home | Pool & Garden Fencing | Glass Fencing | Commercial Fencing | Automatic & Sliding Gates | Manual Gates | Colorbond Gates
| Balconies | Privacy Screening & Railing | Fittings & Accessories | Powder Coating | About Us | Contact Us
Website Design by NetMastery